OBD Info-san! MAXWIN

[Introduction] This application is a dedicated application that can be used with an OBDII multimeter. Various vehicle information can be displayed by connecting with an OBDII multimeter. In addition, it is possible to display the trouble diagnosis code that conforms to the OBDII standard and erase the check lamp. [Captured matter] "OBDII multimeter" (M-OBD-V01) is required to operate this application. Please purchase separately. Also, you need to perform Bluetooth pairing between your device and OBDII multimeter in advance. * For details, please check the instruction manual attached to the product. 【Notes】 ・Do not operate this application or look at the images (monitor screen, etc.) while driving. It may lead to carelessness and cause an accident. Be sure to stop the car in a safe place before proceeding. ・Install it properly so that it will not fall off due to sudden braking or interfere with driving. ・If you do not set the OBDII multimeter correctly, it may malfunction. Make sure you are in a safe place when setting up. Also, do not start unnecessary applications as they may malfunction. ・Battery consumption may increase during use. ・Driving data may not be displayed or saved correctly depending on the status of Bluetooth communication. ・Communication may occur frequently in this application. We recommend subscribing to a packet flat-rate service. ・We are not responsible for any malfunction, damage, or damage to your smartphone due to the use of this application. ・We are not responsible for any monetary damages, lost profits, etc. caused by errors in the display or warnings of this application. ・Our company does not take any responsibility even if the data saved in the recording memory is lost due to a failure or the like. ・We are not responsible for any accidents caused while using this application. ・In addition, please pay attention to safety. * For details, please check the instruction manual of your device or OBDII multimeter.