FlareCON™
The FlareCON™ app sends out commands for RGBAW+UV LED fixtures.
CHAUVET® DJ · com.chauvet.FlareCON
UpdatedSep 23, 2024
PublishedApr 20, 2021
Packagecom.chauvet.FlareCON
MD518a1d1b8181a6de6b16523602c935af8
SHA1 (signer)ED:2C:9E:26:38:70:73:6F:D2:58:7D:A4:C2:73:7C:D7:C7:F5:F1:51
Signed byCN=chauvetlighting, O=chauvetlighting, L=, C=EN, OU=chauvetlighting
Architecturesx86, x86-64, armeabi-v7a, arm64-v8a
Malware scanTRUSTED
Websitehttp://www.chauvetdj.com
Contact[email protected]
What's new
Resolved Issue Affecting Android 14
Description
The FlareCON™ app runs on Android™ to control any CHAUVET® DJ Freedom™ or D-Fi™ receiver as well as any other LED static wash light from your smartphone or tablet (additional hardware required). The Wi-Fi™ signal is generated from the FlareCON™ Air hardware interface and no other Wi-Fi™ signals are needed.
The FlareCON™ app sends out 6 color commands - red, green, blue, amber, white and ultraviolet, using the following DMX channel assignments:
•Channel 1: Red (R)
•Channel 2: Green (G)
•Channel 3: Blue (B)
•Channel 4: Amber (A)
•Channel 5: White (W)
•Channel 6: Ultraviolet (UV)
Please note that lights using different channel assignments other than the one specified above will not work properly with FlareCON™ or the FlareCON™ Air hardware interface.
CHAUVET® DJ static LED wash lights that are DMX-controllable but not D-Fi™-ready can still be controlled via the FlareCON™ Air with the addition of a D-Fi™ hub https://www.chauvetdj.com/products/d-fi-hub/.
For additional information about the FlareCON™ Air hardware interface, please visit https://www.chauvetdj.com/products/flarecon-air/.
The FlareCON™ app sends out 6 color commands - red, green, blue, amber, white and ultraviolet, using the following DMX channel assignments:
•Channel 1: Red (R)
•Channel 2: Green (G)
•Channel 3: Blue (B)
•Channel 4: Amber (A)
•Channel 5: White (W)
•Channel 6: Ultraviolet (UV)
Please note that lights using different channel assignments other than the one specified above will not work properly with FlareCON™ or the FlareCON™ Air hardware interface.
CHAUVET® DJ static LED wash lights that are DMX-controllable but not D-Fi™-ready can still be controlled via the FlareCON™ Air with the addition of a D-Fi™ hub https://www.chauvetdj.com/products/d-fi-hub/.
For additional information about the FlareCON™ Air hardware interface, please visit https://www.chauvetdj.com/products/flarecon-air/.
Required features
- Camera android.hardware.camera
- Faketouch android.hardware.faketouch
- Wifi android.hardware.wifi
Permissions (10)
FlareCON™ requests the following Android permissions:
- Access Network State android.permission.ACCESS_NETWORK_STATE
- Access Wifi State android.permission.ACCESS_WIFI_STATE
- Camera android.permission.CAMERA
- Internet android.permission.INTERNET
- Read External Storage android.permission.READ_EXTERNAL_STORAGE
- Use Biometric android.permission.USE_BIOMETRIC
- Use Fingerprint android.permission.USE_FINGERPRINT
- Vibrate android.permission.VIBRATE
- Wake Lock android.permission.WAKE_LOCK
- Write External Storage android.permission.WRITE_EXTERNAL_STORAGE
