ZFlasher STM32 APK
Version 2.2.0 - ru.zdevs.zflasherstm32zdevs,zflasherstm32,tools,zflasher,stm32
Flash STM32 and STM8 from Android
APP Information
Download Version | 2.2.0 (22010) |
Apk Size | 1.49 MB |
App Developer | ZDevs |
Malware Check | TRUSTED |
Install on Android | 4.0.x and up |
App Package | ru.zdevs.zflasherstm32.apk |
MD5 | 85504213574a8a60db34cd50a8aebd96 |
Rate | 5 |
Website | http://zdevs.ru |
Table of Contents
Download ZFlasher STM32 2.2.0 APK
App Description
ZFlasher STM32 is zdevs,zflasherstm32,tools,zflasher,stm32, content rating is Everyone (PEGI-3). This app is rated 5 by 1 users who are using this app. To know more about the company/developer, visit ZDevs website who developed it. ru.zdevs.zflasherstm32.apk apps can be downloaded and installed on Android 4.0.x and higher Android devices. The Latest Version of 2.2.0 Available for download. Download the app using your favorite browser and click Install to install the application. Please note that we provide both basic and pure APK files and faster download speeds than APK Mirror. This app APK has been downloaded 824+ times on store. You can also download ru.zdevs.zflasherstm32 APK and run it with the popular Android Emulators.
ZFlasher STM32 is a program for flashing STM32 and STM8 microcontrollers. Your device must have support USB Host (OTG), otherwise the program will not work. Supported STM32 series: * STM32F03x / F05x / F04x / F07x / F09x * STM32F1 LD/MD/HD/XLD/CL/MD VL/HD VL * STM32F2xx * STM32F30x / F318 / F328 / F334 / F358 / F37x / F398 * STM32F401 / F4x5 / F4x7 / F41x / F42x / F43x / F446 / F46x / F47x * STM32F72x / F73x / F74x / F75x / F76x / F77x * STM32L0xx cat. 1 / 2 / 3 / 5 * STM32L1xx cat. 1 / 2 / 3 / 4 / 5 * STM32L41x / L42x / L43x / L44x / L45x / L46x / L47x / L48x / L49x / L4Ax / L4Px / L4Rx / L4Sx / L4Qx * STM32L55x / L56x * STM32U53x / U54x / U57x / U58x / U59x / U5Ax / U5Fx / U5Gx * STM32G03x / G04x / G05x / G06x / G07x / G08x / G0Bx / G0Cx * STM32G43x / G44x / G47x / G48x / G49x / G4Ax * STM32H72x / H73x / H74x / H75x / H7Ax / H7Bx * STM32WB1x / WB3x / WB5x / WBA5x * STM32WL5x / WLEx * STM32C011 / C031 Supported GD32 series: * GD32F10x / F1x0 / F20x / F30x / F3x0 / F4xx / F5xx * GD32E10x / E11x / E23x / E50x * GD32C10x / C11x * GD32A49x / A50x * GD32H7x7 * GD32L23x Supported AT32 series: * AT32F4xx * AT32L021 Supported CH32 series: * CH32V003 / V103 / V20x / V30x * CH32F103 / F20x * CH32X03x * CH32L103 * CH57x / CH641 Supported STM8 series: * STM8S * STM8L * STM8AF * STM8AL Program work with: * ST-LINK v1/v2/v3 * J-Link * CMSIS-DAP * WCH-Link * DFU Bootloader * WCHISP Bootloader ps I will be glad to comments and suggestions.
App ChangeLog
- - added support of WLink programmer;
- - added support of WCHISP bootloader;
- - added support of CH32, CH57x chips;
- - added support of AT32L021, AT32F402, AT32F403;
- - extended support of AT32F435;
- - added support of GD32A49x, GD32A50x, GD32F5xx;
- - fixed support of GD32F403;
- - minor fix and improovments.
Jason White
I donated, it then allowed me to connect but "programmed with some errors". Corrupted the flash, managed to recover with a laptop. st vid = 0x0483 (expect 0x0483) stlink pid = 0x3748 stlink version = 0x2 jtag version = 0x23 swim version = 0x7 stlink current mode: mass JTAG/SWD freq set to 0 stlink current mode: mass stlink current mode: debug (jtag or swd) Loading device parameters.... core_id = 0x2ba01477 F4xx: 192 KiB SRAM, 1024 KiB flash in at least 16 KiB pages. ST-Link v2 is open stlink current mode: debug (jtag or swd) stlink current mode: debug (jtag or swd) Unable to match requested speed 7 kHz, using 5 kHz Reset core NRST is not connected Using reset through SYSRESETREQ Halting core core status: 00030003 Open HEX '/storage/emulated/0/Documents/Titan/POWD/Firmware 2.2.6/Firmware FCU503 PWD SL 2.2.6.hex' Check FW Erasing used pages Erase 0: 0x08000000 - 0x08003FFF Successfully unlocked flash Erase 5: 0x08020000 - 0x0803FFFF Successfully unlocked flash Erase 6: 0x08040000 - 0x0805FFFF Successfully unlocked flash Erase 8: 0x08080000 - 0x0809FFFF Successfully unlocked flash Finished erasing 4 pages of 131072 (0x20000) bytes Starting Flash write for F2/F4/F7/L4 target voltage = 1421mV Successfully loaded flash loader in sram Successfully unlocked flash target voltage = 1420mV Target voltage (1420 mV) too low for 32-bit flash, using 8-bit flash writes Write 0: 0x08000000 - 0x08003FFF size 4144 Running flash loader, write address:0x8000000, size: 4144 Flash loader run error (R2 0x00000043 R15 0x00000000 DHCSR 0x00000000 DFSR 0x00000000) stlink_flash_loader_run(0x8000000) failed! == -1 Fail to write data Reset core
Lorena Vargas
Lflasher no log or check in resett surveilance check urls
Christopher Smielowski
Works perfectly. Recognised and flashed my STM32F7 discovery board without any hiccups. If you donate remember to restart the app so it unlocks the rest of the MCU :) will spare you frustration of the "premium" MCUs not working! Thanks for an awesome app!!!
pradeep kumar
It has worked fine 2-3 times after donation and after that it is using error. error Log "failed to find st link v1 by VID:PID Could not link st link device". On home/main page st link is showing connected. Please help me out. I am using st link v2
Junior Valentine
Does what I needed surprisingly simply. I was amazed could use my otg adapter and a st-link tool to erase and flash a new hex file to a chip that now flies a toy drone like it's a professional racing quadcopter! My pc died and this free app helps me to continue my love of tinkering
Abhishek Kumar
needs some improvement. It erases all the sectors of flash. Should limit to erasing only the pages required
Z Ro
Works on Pixel 2 XL without issue. Much easier than dealing with a pos pc!😁👍👍👍
George Chareles Raiyden Ivan Victor Scow
Great opening but just starting lets hope it can hold this five star?
Jeffrey Appleton
Perfect function and great user Interface
Utsav Suha
Limitation to load very small side firmware...