Voltcraft SEM6000 APK
Version 4.41 - com.cei.metermeter,tools,voltcraft,sem6000
Remote control and monitor power consumption of the devices in your home.
APP Information
| Download Version | 4.41 (20240107) |
| Apk Size | 5.23 MB |
| App Developer | CEI Conrad Electronic International (HK) Limited |
| Malware Check | TRUSTED |
| Install on Android | 7.0 and up |
| App Package | com.cei.meter.apk |
| MD5 | 590d0da5250745cb00212b84894f9c28 |
| Rate | 5 |
Table of Contents
Download Voltcraft SEM6000 4.41 APK
App Description
Voltcraft SEM6000 is meter,tools,voltcraft,sem6000, content rating is Everyone (PEGI-3). This app is rated 5 by 1 users who are using this app. To know more about the company/developer, visit CEI Conrad Electronic International (HK) Limited website who developed it. com.cei.meter.apk apps can be downloaded and installed on Android 7.0 and higher Android devices. The Latest Version of 4.41 Available for download. Download the app using your favorite browser and click Install to install the application. Please note that we provide both basic and pure APK files and faster download speeds than APK Mirror. This app APK has been downloaded 217+ times on store. You can also download com.cei.meter APK and run it with the popular Android Emulators.
Direct connection and remote control of the devices in your home. SmartMeter enables you to control your plug-in devices remotely with a smart phone or tablet. –SmartMeter key features: - Remote control – Turn your PC, lamp, fan, coffee machine or any other plug-in device directly from your phone or tablet - Power Consumption – Measure the power consumption of your device in real-time or check the history consumption of the past hours, days and months. SmartMeter enables you to create a safe and responsive environment in your house. SmartMeter products encourage eco-awareness and environmentally friendly attitude by providing the solutions to being aware and in control of the power consumption in your house and thereby letting you save on the electricity bills! Locate and eliminate power vampires and standby power. Through our mobile app one is able to easily control the smart devices from the palm of their hand. Connect the device to your phone – Control the devices in your home – Conserve energy and save on expenses.
App ChangeLog
- 1. Support SEM6000 DUAL
- 2. Bug fixes and performance improvements
App Screens
Older Versions
More Android Apps to Consider
Steven Van Hulle
Too many apps today are written in a haste, more like an afterthought, and (hence) not thoroughly tested. This one is no exception, and I daresay it hasn't been tested at all (as opposed to "tried"). The first time you search for devices it finds them, and measurements are taken fine. Every next time you open the app, however, all devices are gone or no longer communicate. Solution: physically(!) unplug and re-plug the devices (no, switching off and on again doesn't work). The metering devices seem OK, but the app is utter garbage. Oh, yes, and screen layout isn't adapted to tablets either. Incompetent programmer and incompetent product manager (if not the same person...)
FlumenSanctiViti
!!! WARNING !!! Read before you buy! I have 6 SEM6000 devices monitoring several of house appliances. I really like how much info they provide via the app, however devices have one big issue: when a blackout happens and after a power returns, devices stop recording a power consumption. However, they continue with recording once they have been accessed via the app. This is a big problem because it can pass several days before I access them via the app and in the mean time, all data for those days is lost. Could you please fix this ASAP? If it helps, all devices have Firmware version 1.13 and Voltcraft is Ver.3.5. EDIT Update (21.03.2021.): DO NOT BUY THIS!!! Even after several updates (devices are currently on firmware 1.17), there are still unsolved problems! Devices crash every few days randomly, and when they do, you cannot connect with them unless a devices is physically unplugged and plugged back in. And while they are crashed, they do not record power consumption! Further more, on each power loss, they don't record power consumption until you connect with them via phone, and that means it could go for days before you notice they need to be either restarted or accessed via phone! Quite pathetic. Lastly, they still don't provide linear scale for power consumption, only logarithmic, which in most cases is useless. Do yourself a favour and avoid this product, it's more of an expensive toy than an useful tool.
N A
The app is not that bad. If the values shown are accurate or not i can't say. The ON/OFF button can accidentally be pressed without any warning which is not good at all, user should be prompt to confirm this action to avoid improper shut downs. Also when the app is not in the background and you start it again the sockets shows offline, so you got to scan again to find them, it can take almost a minute to show online and sometimes not at all.
Tomek Sznycer
The app crashes constantly on both my Android devices so I need to be very quick to read any usage. I think it was more stable when I had only few meters. Now I have 15...
J.
The app is poorly designed and after changing the device's password, it does not see it anymore. When resetting the device itself, the app is able to see it and configure it for the first time but later attempts will fail. Tried uninstalling the app but it has the same behaviour. There are hundreds of complains in support sites about this specific brand.
Zdenko Janov
No min/max Volts, current, watts. Why? Over protection just between 1000-4000W. More sensitivity needed (maybe from 100W?), with enabling short period of overload (for fridges for example). After last update works very well (but it takes too long - my device warranty is over 😀 and there is much more and smarter devices like this)
Zahir Sheikkariem
Like the product. However please allow for more digits after the decimal for the tariffs. Where I live my normal tariff is 0.22522 and my valley tariff is 0.20512. I currently have to round this up to 0.23 and 0.21 respectively which isn't quite accurate. I have a big user (2 AC units and an outdoor unit) connected to the powermeter which now isn't accurately telling me what my cost is per kWh. Also, I agree with an earlier review to change the off button to sliders instead of tap buttons.
Ger-Jan Fleurke
Inaccurate. Just using it for a few hours and the app misbehaves. It registers 0.080 A and a PF of 0.000 at 70 W. When I use a Expect script on my Raspberry Pi to read the (raw?) data, it says 0.336 A with a PF of 0.86, which makes way more sense! Why such strange values? Why is only the power correct? Luckily I'm not planning to use the app, but only integrating it in my domotica software, but users planning on using the App be aware! Also the language defaults to German, without a setup menu..
Andreas Hartmann
Connecting takes a long time. Every time this app is launched, it has to rescan for the plugs, even though it should just remember them. The UI is quite poor. Basic functionality like switching, fetching data and exporting works, but doesn't seem extremely reliable.
Ralf Braun
27 dec. 2020 update mostly bricked the energymeter, update shows ver 1.0 instead of 1.16, reset does not help, updating again&again, no energy registration anymore, tariffinfo is not stored, etc., one word=worthless -- In general: tariffsettings too coarse for Europe, please replace "speedometer" dial by a moving stripchart of approx. 10 min