TAPE ECHO

TAPE ECHO is a software realization of a tape echo without fed back into the pre-echo signal. By using the headphone stereo output of an android mobile device two audio outputs with variable different delay relative to the microphone input can be realized. see also: http://www.kramann.info/___downloads/tapeecho.mp4 TAPE ECHO is made for purposes of experimental music or just to make it possible for one musician to perform canon music with up to three voices. In combination with active loudspeaker boxes TAPE ECHO can be used as tool for life electronic music. WARNING: When using TAPE ECHO an inappropriate positioning of microphones and loudspeakers or an extreme amplification may cause audio feedback. Getting started with TAPE ECHO Sing a canon and let TAPE ECHO apply two different delays to your voice: When starting TAPE ECHO the settings-screen appears. Turn here tempo e.g. to 96 beats per second, left delay to 8 and right delay to 16 beats. Pressing the play button starts TAPE ECHO. For your orientation left and right beat- and bar-counts are shown. Begin singing your favorite canon e.g. "Frère Jacques..." starting when left beat count flips to 1. TAPE ECHO was already successfully tested with the following devices: 7'' tablet Asus Nexus 7 (2012, Android 4.2, 1,2GHz Quad Core, 1GB RAM) 10'' tablet Vodaphon Smart Tab ||| 10 (Android 4.2.2, 1,2GHz Quad Core, 1GB RAM) O smartphone GT-5570 (Galaxy Mini, Android 2.3.4, 600MHz 1 Core, 280MB RAM) Known problems with older/weaker devices: Sometimes the initialization fails. - Just start TAPE ECHO again. Have fun!