Jammer Detector

is the App that allows you to detect presence of jamming devices around. In that situation your mobile phone loses the ability to make a phone call. If it happened, the App gives you a visual or sound message. The time for reaction on a working jammer depends on hardware communication part of your device and typically can be in 30-60 sec range. . A: Yes, That's exactly the app does. A: If your phone has been jammed and you want to get your cellular service back, you have three options to do it: 1. Change your current location. Just make few steps aside. Depending on the power of a jamming device, the affected area can be between a meter and a hundred meters. 2. Change 'Network mode' in the 'Settings' of your phone (for example, Settings -> Connections -> Mobile networks ->Network mode). The 'Network mode' could be: LTE (4G), UMTS (3G), GSM (2G). In some cases jammer devices are not able to work in all type of frequency ranges (network modes). So, it's possible that one of the network mode will be working despite the jammer. 3. Find the jamming device and turn it off. In some cases it's possible to localize the spot where the jammer has been installed. You can use an additional device called the RF Detector for it OR just use your phone, but in the last case you need some skills to search the jammer. PS: Pay attention, if your cellular signal is very weak and the phone lose it, the app also will do alarm. A: That is exactly the purpose of this app: to inform when your phone out of service, no matter the reason of that. It could be the wood area, or a jammer device, or a deep underground. But if you launch the app with no cell service, the alarm will not go off until the switching between ‘in service’ and ‘out of service’. If you have any problems or any suggestions to improve this application, please feel free to contact Thanks!