Galaxy Sensors APK

Version 1.8.6 - it.ale32thebest.galaxysensors
Last updated: 2019-02-02 09:03:29

Temperature, Humidity and even more, a complete weather station in your pocket!

APP Information

App Download Version1.8.6 (46)
Updated2019-02-02 09:03:29
Apk Size3.15 MB
App DeveloperAlessandro Digilio
Malware CheckTRUSTED
Install on Android4.0.x and up
App Packageit.ale32thebest.galaxysensors.apk

Download Galaxy Sensors 1.8.6 APK

App Description

Galaxy Sensors is ale32thebest,galaxysensors,tools,galaxy,sensors, content rating is Everyone (PEGI-3). This app is rated 4.5 by 6 users who are using this app. To know more about the company/developer, visit Alessandro Digilio website who developed it. it.ale32thebest.galaxysensors.apk apps can be downloaded and installed on Android 4.0.x and higher Android devices. The Latest Version of 1.8.6 Available for download. Download the app using your favorite browser and click Install to install the application. Please note that we provide both basic and pure APK files and faster download speeds than Galaxy Sensors APK Mirror. This app APK has been downloaded 6533+ times on store. You can also download it.ale32thebest.galaxysensors APK and run it with the popular Android Emulators.

** Developed for the Samsung Galaxy S4 and Samsung Galaxy Note 3, full compatibility is not guaranteed on other models ** 

** models like Galaxy S3-S5 or Galaxy Note2-Note4 are missing temperature and humidity sensor, not my fault, sorry, the device manufacturer has decided to remove these sensors **

** if a sensor is set as "NOT PRESENT" is because your phone doesn't have it **


  - Ambient temperature in degrees celsius 

  - Percentage of moisture in the air 

  - Light intensity 

  - Air pressure 

  - Height above sea level 

 - widget with ambient temperature! more coming soon

** The data is read directly from the sensors could then have an error of up to 5-10% (in the worst case) that does not depend on me, but by the sensors, unfortunately I can not do anything about it, to try to reduce the errors Please keep the device on a flat surface for a few seconds, so that the values ​​are optimized, if your hands touch the device, the temperature will be too high of some degree  ** 

If you want to report the full compatibility of your device with the application please leave feedback or send me an email, so it will be added to the list, any feedback and comments are very much appreciated, the application aims to be simple and instant, to have at hand all the data from the main sensors of the phone, if there are suggestions, recommendations and requests for additions will be happy to provide (where possible)

 1.1 added Google Analytics

 1.2 added translation in:








 1.2.1 fixed an orientation bug

 1.3    added icons

 1.3.1 bug fix

 1.3.2 finally aviable first widget

 1.3.3 added share functionality, fixed a bug with translation

 1.3.4 fixed russian, widget 2x1

 1.3.5 added imperial system ON/OFF menu option

 1.3.6 fixed some translation, added version number, added option to change font

 1.3.7 added inHg to imperial system

 1.4    fixed widget, added notification, new accuracy (0s: Low -15s: Medium -45s: High)

 1.4.1 fixed layout

 1.4.2 fixed layout for medium font size

 1.4.3 fixed a problem with font switch

 1.4.4 battery usage should be 1/4 now

 1.4.5 added greek and hungarian

 1.4.6 added dutch

 1.4.7 added settings menu, added notification kind

 1.4.8 added fist start notification

 1.4.9 divided option to have imperial system for temp/altitude/pressure

 1.5 fixed translations, now you can select background color, now you can set text dimension and report translation error via mail from inside the app =)

 1.5.1 some fixes, added material ActionBar/theme

 1.5.2 fixed translations in ru/de, added text color option

 1.5.3 added option to set pressure at nearest sea level, various fixes

 1.5.4 bug fixes

 1.5.5 bug fixes

 1.5.6 (requested feature) now you can pause sensors, if you click on datas (light value, temperature value and others) it will pause, if you click again it will read values again =)

 1.6 added more material elements

 1.6.1: added floating action button for settings, layout fix, added rotation support, general fix

 1.6.2: added polish translation, added psi unit for pression

 1.7: support for new devices

 1.7.1: fixed share, general fixes, api updates

 1.7.2: general fixes, color change fix 

App ChangeLog

  • 1.8: new icon shapes, bug fixed, updated libraries, new api for android 8.1, apk size reduced to half size just 2mb, removed unnecessary libraries
  • 1.8.1: fixed notifications on Oreo+
  • 1.8.2: api 28 for Android pie, updated dependencies, new settings menu, moved to Firebase
  • 1.8.3: fully moved to firebase
  • 1.8.4: finally fixed temperature widget (if it doesn't work remove it and add it again to your home screen)
  • 1.8.5: hotfixes

App Screens

Galaxy Sensors Screenshot 1Galaxy Sensors Screenshot 2Galaxy Sensors Screenshot 3Galaxy Sensors Screenshot 4Galaxy Sensors Screenshot 5

Reviews From google play store

Simple, effective, accurate... 5 stars! Even though there are adds, they are small and at the bottom of the sceen. NOT popping up and making you wait 30sec to watch the stupid add like 75% of the other apks (apps) on android!

People complaining about the temp and humidity being off compared to another device or gauge away from them apparently aren't accounting for the heat and humidity of the phone, their breath, and/or their hand. My only request is that it work with IFITT (it might and I haven't discovered it) and that the notifications could be customized. Great app!

Good App with the environmental sensors. I would give 5 stars if it also had GPS. Actually I would like to upgrade to 5 stars because this Winter we started having house and room warming issues. Some parts of the house were cold and other parts seemed very warm. I used this tool to make "T Delta" comparisons between the two parts of the house and the outside walls of the room. And I it did a good job reading the temp differences and I was able to "size" the btu's needed to get the issue resolved.

it works fine and free that's why 5 star. Someone said the temperature is incorrect but I use it only for humidity as, I suppose, the temp will never be correct unless you are not using any app. Phone does not have sensor, so it will measure the temp of the screen. Tell me if I am wrong.

Only used a few days but so far I haven't had any problems. The app is doing what I wanted. I may change my mind later but good for now.

pressure monitor can't be understood. All I know is barometric pressure so that's why the low rating

Good. But wish I could set my height above sea (which often is known) instead of guessing air pressure at sea level (which is unknown most of the time)

all its doing is tapping into your weather network. dont believe me... put your device in the fridge for 5 min and watch the temp and humidity...NOT change.

The reported Altitude is always inaccurate until I adjust the Pressure at Sea Level. If I could lock in the pressure at sea level that I choose, instead of it going back to the default setting of 1013hPa every time I open the app, this would save me a lot of time screwing around with it.

works with my galaxy 8+ noaa says its 50f but it feels colder . installed the app and grabbed a thermometer and its actually 48f . this actually works good job guys and gals on making this happen. 5 stars .

Very useful. It's really convenient to have the sensor data available with me all the time. The performance is almost as good as professional instruments. Thanks for a great tool!!

altitude is off by half (says 350 ft when I'm at 700) and some sensors are unduly affected by observation (breathing towards your phone increases humidity). I don't know if this is a hardware issue or not. using S8+

I just opened the app and found that I was taken a back by the simplicity and functionality of it. Good job on this. It works completely with my old Samsung Galaxy 8 Active.

this app updates the readings several times a second, you can see the pressure down to 2 decimals. works great on galaxy s8

Simple and works! I only needed it for room temperature. Adjusting it to US units was very easy. Also, the ads are not intrusive. I don't need the light info but it seemed odd (got higher as I moved away from light).

Useful app. Since last update I can't change the colours of the font or the background, the settings have disappeared from the settings menu.

great app if u have fulfilled the requirements of it . As long as ur device have these sensor it will tell u ur current surrounding temperature, humidity etc

Temperature & Humidity are incorrect readings, not accurate at all. Sorry, I'm gonna uninstall it.

can't tell if the humidity is correct but I like it


Apk scan results

Apk Scaned By TotalVirus Antivirus,it.ale32thebest.galaxysensors.apk Was Pure And Safe.
Scan Stats:failure:0|harmless:0|malicious:0|suspicious:0|timeout:0|type-unsupported:11|undetected:55|
Name:aSAN9awvyFxRQsA4BRsw20190131-77755-knwklu SHA-1:5564f6a1eecde47904eb5a0a8dcacad2804583b0 SHA-256:ae427e2cace45e762c7cc8198b64c3c315159c95a12bb5cdec2397fa762e6c83 SSDEEP:98304:zYqdYi3stfa/JwoqsUJIpSaI8/3UgnLmqy:0ti3N/J9UGjt/3Ugno File type:Android Magic:Zip archive data, at least v2.0 to extract File size:3299511 Uncompressed Size:6570134 Contained Files :700 Contained Files By Type:MF:1,RSA:1,SF:1,dex:1,png:328,pro:1,ttf:1,xml:299,


requires following permissions on your android device.



Certificate Issuer:OU:Digilio, CN:Alessandro
Certificate Subject:OU:Digilio, CN:Alessandro








Interesting Strings

Older Versions

More Android Apps to Consider

Empty Folder Cleaner
Delete all empty folder with just one​ click.
App vault
Version 2.14.11 -
WiFi Mouse HD free
Transform your android devices into a wireless mouse, keyboard and trackpad.
Root Checker
Verify that root (superuser or su) access is properly installed!!.
SD Maid - System Cleaning Tool
A maid for your Android, to keep it clean & tidy..
APK Editor Pro
Insight an APK File!.
Phoenix browser-Fast browsing & Data saving
Version V9.9.9 - com.transsion.phoenix.
GPS Compass Explorer
GPS compass - save your position like "my car or my hotel", and navigate back..
Maps for Minecraft PE
Catalog Maps for Minecraft PE (Pocket Edition).
PvP Skins for Minecraft PE
3300 PvP Skins for Minecraft PE - Be Stronger with us..