Access Control Manager

*The Access Control Manager app only works on smartphones which Android Beams is supported (Android 9.0 and below). By Access Control Manager app you can manage access cards that can open the door of your home or building. It is necessary to have the Golmar N4502 / NFC access kit or the EL4502 / NFC RF access module. You can create new installation and then edit the list of cards that can access, also relays that activates each card the same way you can manage the opening times of the relays R1, R2, R3 and transistor output 12 VDC panic P. To operate the mobile device you must have NFC on your device and Android version 4.4 or higher. Edit installation: Enable and disable Master and Resident cards to manage access to your home or building. - Through Master cards you can enable / disable Resident Card and Installation on the plate. - By Resident cards you can access your home or building. Communication with the board: It may transmit device data to the plate by NFC, if your device implements, bidirectionally. You can send data to the plate, receiving plate data and update an existing installation on the device. Ticketing: You will be able to register cards to define a number of accesses. Once you have accessed with card access number configured it becomes unusable irreversibly. Visiting card: Store data such as name and / or contact phone number on the card. Link plate: You need to link the plate with the device to exchange data with it. - First enable the card link on the plate you want to manage. - Then press the option on the device and approaching the card to the device. - Finally approach the link card to the plate, thus the device and the plate will be linked. OpenGo Open the door of your home or building by OpenGo. Active an access card and open the door of your house or building.